About Our Labs & Technical Service Site Map Contact Us Help
Home Products Career Oportunities Equipment for Sale About Us Locations
 
 
Products
 
Concrete Ready Mix
Concrete Masonry Units
Hard Scape
Pavers
Retaining Walls
Segmental
>Rockwood Classic with PCS Walls
RockWood Cottage Stone LITE Walls
Rockwood EZ Wall II
Rockwood Rustic
Rockwood Vintage Wall
Rockwood Classic Edge
Pyzique Walls
Pre-Cast
Insulated Concrete Forms
Sand and Gravel
Stone and Brick
Construction Accessories
 
Quick Links

 

Quick Links
 
   
Rockwood Classic with PCS Walls

Rockwood Classic with PCS 6" Block Wall System
Rockwood's Classic with PCS wall design is perfect for Architectural flexibility without having to sacrifice stability. The Classic block is manufactured with an anchor bar built right in that allows a 3/4" setback on every course. No need to use costly, time consuming pins or clips with the Classic System. You can build a retaining wall up to 48" in height without worrying about soil stabilization. If you wish to build a wall higher than 48", you should consider consulting an engineer. He will determine the amount and the placement of geo-grid in your project. Classic 6" is available in the following face options and colors.



Solid Colors:

• Natural Gray
• Sandstone
   

Blended Colors:


• Country - sandstone and charcoal

• Earth - brown and golden


• Antique - red and charcoal


• Granite - gray and charcoal blend
• Custom - custom colors are available with a
  1,000 square foot minimum order.
  Call for details.
 

Rockwood 7 5/8" Classic Block Wall System
This Classic block was made for the professional wall builder. It allows you to lay nearly 1 square foot of retaining wall at a time. This too is mortarless, pinless, stackable system that can be built to 48" in height without the use of geo-grid. The 7 5/8" block has a built-in anchor bar, which allows an automatic 1" setback when installed. The 7 5/8" Classic is available in the following colors.

Solid Colors:


• Natural Gray

• Sandstone
• Custom colors are available upon
  special request. Please allow
  adequate lead-time. Call for additional
  information.


Specifications:

• Size:  7 5/8" high, 18" wide, 12" deep
• Face:  Beveled, Straight
  (additional lead time)
• Area:  .95 square feet
• Weight:  Approximately 80 lbs.
• Setback:  1" per course
• Height:  Up to 48" in height
  without engineering

Rockwood Classic Universal / Straight Sided Beveled Caps
Rockwood's Classic Universal Caps come in al of the colors that are offered in our Classic blocks. They get installed in a variety of ways. Most of the time, they are installed hanging over the front of the top course by about 1". Then glued to the top course by using "Super Stik" adhesive.

 

Specifications:

• Size:  4" high, 11 1/2" deep, front is 18" wide, back on universal is 14"
• Face:  Universal Straight or straight edged beveled face
• Area:  .50 square feet
• Weight:  Approximately 56 lbs.
 
 
 
 
 
 
   
 
 


Home | Products | Career Opportunities | Equipment For Sale | About Us | Locations
About Our Lab & Technical Service | Site Map | Contact Us | Help

Copyright © 2006 Consumers Concrete Corporation All Rights Reserved - Read our legal statement and privacy policy